The PTS ZEV Technologies OZ9 Elite GBB pistol (Standard Version) is the gas blowback airsoft pistol that faithfully replicates the appearance and many of the innovative features of the actual ZEV Technologies OZ9 pistol.
Like the real OZ9, modular chassis consists of the entire firing mechanism and is easily removable from polymer frame for ease of maintenance or modification via a single takedown pin.
Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the ACRO P-2™ red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately.
Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitter. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition.
The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes.
In addition to use as a primary optic on handguns, the ACRO P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight.
Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
The brand-new, upgraded EDGE 2.0 system has a number of upgrades to take the previous EDGE series from Specna Arms to the next level.
Starting off, the new version has a built-in GATE ASTER MOSFET unit. The ASTER is equipped with innovative optical sensors and a smart fuse that protects the battery, motor, and controller even in the case of reverse battery connection. The unit features 250 possible trigger sensitivity settings and plenty more functions and features to give you the upper hand on the airsoft field!
The ORION gearbox is the result of several years of experience in the field of internal parts. The gearbox stands for reliability, durability, and battle-tested solutions from the top shelf. A reinforced gearbox shell, piston with a steel full tooth rack, aluminum nozzle w/ O-ring seal, polymer ball bearing piston head, aluminum double O-ring cylinder head, and 7mm ball bearings provide a higher level of durability and room for further tuning.
Lastly, the EDGE 2.0 system features the same ESA (Easy Spring Access) system but now upgraded for even further convenience. It’s hard to imagine an easier and quicker way to change your main spring. The ESA2 allows you to quickly adjust the muzzle velocity with minimal downtime at the field. You can adapt your replica to indoor or field games in a matter of minutes.
If you run the GUCCI Nods, you potentially want to upgrade it like the cool kids do nowadays!
Nocturn Industries The Ultralight Articulating Panoramic Night Vision Goggle -Bridge, UAPNVG-B”Chimera Bridge” , is the next evolution in panoramic nvg systems being the first articulating bridge upgrade for existing quad tube devices.
This patent pending system enables the lowest possible profile by stowing the pods back to the helmet to a profile typical of articulating binos reducing neck fatigue by pulling the center of gravity significantly closer to the natural pivot point of the neck.
Panoramic system pods attached to the UAPNVG Bridge can be stowed individually without fully stowing the device which allows the user to clear door thresholds, increase head clearance in a vehicle, have rapid access to the night vision function, enter and exit vehicles much faster, reduced brush snag hazard, and use weapon mounted optics/thermal devices simultaneously with the goggle.
The bridge system is plug and play at a user level with existing panoramic nvg pods offering compatibility with L3 GPNVG18, Lindu QTNVG, ANVIS10, Photonis PD Pro-Q, and more.
When it comes down to “Brain Buckets” which protect your head from being hit, you should only trust the best system available on the market (fancy looks aside!). Is the SCHUBERTH M100 the system you should look for in 2024? You find that out in this article so, be our guest and enjoy the read.
The SCHUBERTH M100 is a modern combat helmet with above average wearing comfort and a high level of ballistic protection. Due to its rail system with open architecture and its adjustable interior, it offers excellent performance on the battlefield. An over average proportion of shared parts across all sizes and optimized maintainability guarantee low life cycle costs and a significant degree of sustainability.
The challenges facing a modern combat helmet have changed fundamentally. In addition to requirements that have remained static, such as the broad spectrum of use, ease of repair and cost efficiency, core aspects such as protection, wearing comfort and compatibility with a wide range of existing and future peripheral devices have evolved rapidly. The shortened technology cycles pose another challenge to future use. All these factors need to be considered today to provide smooth adaptability and avoidance of obsolescence throughout the life cycle.
The SCHUBERTH M100 conception of interior design follows a new approach. In addition to a wide range of sizes and a variety of head shapes, permanent use with a combined hearing protection/ communication headset must also be considered to ensure that the user’s health and safety is guaranteed, as well as the the ability to communicate over a long period of time without interferences. It should also be emphasized that a desired high level of wearing comfort is a significant contribution to broad user acceptance and satisfaction. Finally, an above-average share of common parts across all sizes as well as optimized maintainability ensure low life cycle costs and reduced logistical effort.
The helmet shell consists of an advanced aramid composite with an optimized resin system and is a base that offers potential for further development and capability enhancement throughout the product life cycle. The current version is already oriented towards the high fragmentation protection of an HPPE helmet without disadvantages such as reduced trauma protection and temperature sensitivity, low service life, as well as high costs and complex repair. Additionally, the M100 features fully ballistic screws and therefore allow the integration of a rail system that can be.
An EPP-based layer offers a high degree of shock absorption paired with a reduction of dynamic bulging in the event of bullet impact resulting in a very low trauma value. In addition, the long durability and high temperature resistance contribute to cost reduction and ease of logistics.
The ergonomic approach to the inner lining was based on one of the biggest surveys ever conducted to determine different head sizes and relevant parameters to secure superior fitting. The specially designed split head ring is designed to be compatible with all communication solutions (Peltor, Invisio MSA, Sordin) without the need to remove pads from the helmet. The wide range of available sizes is setting a new industry standard by exceeding most of the competitors’ options.
The two separate head ring parts act independently and allow the highest degree of customization available to fit extreme shapes like the completely round or very oval and high heads. The integrated net ensures superior ventilation while the new adaptable pad system will always remain in the helmet shell reducing the likelihood of loss.
The strap is designed with a unique concept that allows the communication systems to be enclosed by the strap and not displaced, regardless of any movement.
Due to the holistic approach of the helmet system, trauma reduction can be achieved in the technologically closely coordinated combination of hard-ballistic protection and interior equipment while providing a superior fit. This results in a limited back face trauma that even exceeds the harsh requirements of VPAM 2 by not only staying significantly under the mandatory level of 25 J but not even exceeding 7,1 J in general.
The SCHUBERTH M100 modular rail system consists of two side rails, one rear rail, and the night vision device mount. The weight- reduced rail parts are one size fits all independently from the shell size, thus facilitating ease of repair and spare parts logistics.
During the development of the rail system, special emphasis was placed on compatibility with commercially available accessories to be able to continue using the equipment already procured. Furthermore, new SCHUBERTH Enhanced Connection Devices (ECD) were created, to connect additional accessories and to keep the few slots free in the best possible way.
These interfaces act as a low-profile, click in cable guide and can be used to add artificial camouflage, camouflage cover or rubber bands to attach or mount further devices. By creating the SCHUBERTH EDC an open source and royalty free connection is available for future projects to lock into the rails, with limited cost and a wide range of options available to be developed.
The side rails furthermore provide the connection for devices already in use, such as earmuffs, lights, or protective goggles but the number of connections for protective goggles and oxygen masks is doubled so that both can be used in parallel. The energy supply in the form of battery packs, counterweights, or other devices such as the digital compass can be quickly mounted on the rear rail.
The M100 ist available as High, Mid and Full Cut to fulfill the operator needs on the modern battlefield.
If this got your interest, the M100 is available on the civilian market as well via Recon Company. Start well protected into the 2024 season and run the future in head protection with the SCHUBERTH M100 combat helmet!
Weighing under 8oz, the Primary Arms Optics SLx 3x MicroPrism is smaller and lighter than many red dot sights, offering crystal-clear glass and 3x magnification offer improved precision at distance.
Even in close-quarters, the optic’s wide field-of-view and forgiving eye relief make it easy to snap on target. All SLx optics undergo rigorous field-testing during development to best serve you in any environment.
The Lithuanian Armed Forces received the fourth batch of American-made JLTV armored vehicles. The equipment arrived in the country at the end of December 2023. This batch consisted of 50 units of army armored SUVs.
This brings the total number of JLTVs in the Lithuanian military to 200. Thus, Lithuania received all the armored vehicles ordered within the first contract. A certain number of these vehicles are armed with the CROWS remote weapon with a 12.7 mm heavy machine gun.https://mil.in.ua/en/news/lithuania-received-50-jltv-armored-vehicles/
Four products from VFCs line up under go some improvements for better performance in the field in 2024. Up for the updates are: M110, M110 K1, SR25 and SR25 ECC GBBR.
Updates include remove the valve knocker lock and replace the hammer with the V3 version. If you need to updates, please contact VFC Pentagon Service Center and our local dealers.
Wilcox weapon solutions are ergonomically designed for operators to quickly and comfortably control laser and fire control devices. All are designed with robust materials that stand up in the harshest environments.
View all our grips, activation keypads and flip mounts.
The Super Tool 300 is a compact multi-tool that’s designed for heavy duty work. Built to be used daily with some of our heftiest tools including needle-nose pliers, replaceable wire cutters, saw, and a metal/wood file. The ST300 is one of the best Leatherman multi-tools for construction, electrical work, maintenance and your daily needs.
From our factory in Portland, Oregon, we’re committed to bringing you the best multipurpose products to help you solve expected and unexpected problems in everyday life. Armed with creativity, know-how, and a Leatherman, you’re ready for whatever real life throws your way.
